CLIP-LOCK ROOF

1. MATERIAL

Types of steel sheet that can be rolled for Cliplock profile:

• Galvanized steel sheet: galvanized according to Japan’s JIS standards, with a thickness from 0.35mm to 0.70mm, this type of sheet can be rolled according to the Cliplock profile to use for large factories, with characteristics of anti-corrosion and high-oxidation, they are commonly used for civil, factory - industrial works.
• Pre-painted galvanized steel sheet: can be rolled according to the Cliplock profile to use for factory buildings, highly resistant to corrosion and oxidation. With a thickness of 0.35mm to 0.70mm, plated with a layer of colored zinc on both sides, the colors are diverse for customers to choose following the design of their works. Be widely used for civil works, factories and industry.
• Aluminum-zinc alloy-coated steel sheet: be plated with a layer of zinc aluminum alloy, with good heat resistance. Corrosion and oxidation resistance is better than Galvanized steel sheet, Pre-painted color steel sheet. Aluminum-zinc alloy-coated steel sheets can be rolled according to the Cliplock profile with a thickness from 0.35mm to 0.70mm, suitable for civil, factory - industrial works.
• Pre-painted Aluminum-zinc alloy-coated steel sheet: just like Aluminum-zinc alloy-coated steel sheet, Pre-painted aluminum-zinc alloy-coated steel sheet is plated with a layer of zinc-aluminum alloy, with good heat resistance. Corrosion and oxidation resistance is better than Galvanized steel sheet and Pre-painted color steel sheet. In addition, steel sheets are also coated with a layer of color, with many colors for customers to choose for their works, this is a type of steel sheet chosen by many customers to be rolled according to the Cliplock profile with a thickness from 0.35mm to 0.70mm, suitable for all civil or industrial works.
• Cliplock profiles often use high-strength G500 - G550Mpa steel sheets to ensure the connection between Cliplock roofings and fixed belts.

2. STYLING AND STRUCTURE

• Useful width: 940mm/420mm
• Rib height: 40mm/41mm
• There are recessed clamps made from galvanized steel or aluminum alloy connected to the purlins
• Thickness: from 0.3 mm to 0.70mm (Depending on requirements)
• Length according to design requirements
• Rich varieties of colors, bring a sustainable and luxurious beauty.

3. ADVANTAGES

Advantages of Cliplock steel sheets:

• Connecting the screw-free recessed clamps with a rib height of 40mm/41mm completely eliminates leakage and corrosion through the screw hole in the steel sheet roofings, providing absolute peace of mind for the users.
• With a rib height of 40mm/41mm, the distance between two rib foots is large to help to drain water quickly to bring absolute safety to the roof. Avoid algae caused by stagnant water.
• With a 40mm/41mm rib design of Cliplock steel sheets and sub-ribs between the two main ribs, it enhances the stiffness of steel sheets to make it easier to travel, without deforming the steel sheets when installed.
• Cliplock steel sheet is harder than conventional steel sheets, it allows the distance of the purlin frame to be larger but still retains a high level of safety, saving purlin costs for users.
• Good rust resistance thanks to no screws.
• Ensure maximum durability for a perfect roof.
• Construct right at the construction site to meet the works with large long roofs by mobile steel sheet rolling machine without connection.
• Always bring the most convenience and savings to customers.

4. ACCESSORIES

To enhance the aesthetics of your home's steel sheet roof, you need some more synchronous accessories:

• Cliplock clamps
• Belt fixing screws

5. RECOMMENDATIONS FOR USE

To increase the service life of the product and ensure long-term durability, please note the following points:

• Tighten the finished product when moving.
• When loading and unloading, care must be taken to prevent scratches and distortions.
• Do not drag finished products over rough surfaces.
• Do not drag hard objects on the corrugated iron surface. 

If you are interested in mechanical processing products or want to find a reputable and quality manufacturer and distributor, Butraco is always happy to advise and provide all you need with the motto “What you need, we have it all”. With a team of experienced and enthusiastic employees, we have gradually affirmed our position as a leading company in the field of manufacturing and processing interior materials with corrugated iron, stainless steel, and mechanical processing products.

-------------------------------------------

BUTRACO VIETNAM COMPANY.,Ltd

• Address: R312, Building N03 - Tran Quy Kien - Cau Giay - Ha Noi 
• Factory: Nguyen Khe industrial zone - Dong Anh - Ha Noi
• Hotline: 0983566468 - 0979566468